The “New” Complete High-Flow Airbox Assembly for the Polaris Ranger RZR boosts Horsepower by nearly 3.5HP! It replaces the stock airbox and intake tract to provide you an oversized Airbox, allowing for a larger air filter, and Aluminum intake tube for optimum airflow. An oversized X-Stream Top Filter is used, substantially increasing airflow and dirt & dust capacity. K&N’s unique pleated design provides a larger surface area and an increased volume of air flow over the stock unit, designed to offer better throttle response, added horsepower and longer service intervals. The Airbox and intake are black powder-coated, withstanding the elements of rust and corrosion. A separate crankcase breather keeps the air filter cleaner while dissipating the extra heat and oils generating from crank pressure. For increased protection and longer service intervals a K&N Dry Charger is supplied for extreme dust or wet conditions. Fuel-Management modifications are not necessary to receive optimum performance. K&N High-Flow Filters are washable and reusable. All K&N Off-Road filters are covered by our K&N Racing and Off-Road Limited Warranty.

• K&N’s Complete Airbox Assembly offers substantial
  amount of airflow while increasing dirt capacity,
  horsepower & torque.
• Oversized X-Stream Top Air Filter
• K&N Drycharger included for longer service intervals
  and increased protection.
• Includes separate crankcase breather
• No jetting or fuel modifications necessary.

K&N Engineering, Inc.
TEL: 951-826-4000 Ext. 4338

FAX: 951-826-4003

E: [email protected]

Popularity: 29% [?]

Tippmann Design, LLC, a newly formed ATV conversion company, has invented a simple, easy to mount ATV water balloon launcher.
This new Balloon Launcher attaches quickly to any 1 ¾” roll bar assembly and is just as easy to remove when your balloon launching is over.
The Balloon Launcher will heave your balloons well over 200 ft. with the simple pull of a strap. This is one person operation and offers hours of fun for your family and friends. We are introducing this product at a low cost of $35 dollars.

The FULLY ASSEMBLED balloon launcher comes complete with:
• 2 ABS Clip mounts
• Large Durable Latex Launching Pocket
• 4 Fully Adjustable Nylon Straps
• Strong Nylon Launching Cord
• 200 Long Distance Launching Balloons

Ready to mount on the following ATV’S
• YAMAHA RHINO
• POLARIS RANGER
• POLARIS RZR
• KAWASAKI MULE
• KAWASAKI TERYX
• ANY UTV WITH A 1 ¾” BAR.

$35

For additional product information:
Call TOLL FREE 866-286-8046

Visit us on the web @ www.tippmanndesign.com

Popularity: 34% [?]

Click the image below to check out the Kawasaki Teryx line up!

Popularity: 51% [?]

This series is demanding attention. This weekend at Coal Mine Canyon in Cameron, AZ

UTV Classes Include:
Stock, Sport Modified, Pro Mod, Baja Pro, Trophy Karts & China Lites

To keep up with race results and the next stop on the series go to: http://www.whiplashracing.com

Popularity: 41% [?]

In continuing the expansion of our UTV applications, we’re  proud to introduce the all new Long Travel Suspension System for the  Kawasaki Teryx. Designed as a complete system, including front and rear  upper and lower control arms, extended length tie rods, stainless  braided brake lines, heavy duty replacement axle shafts and the heart of  the system, Dirt Logic 2.0 Coilovers with remote reservoirs. The Dirt Logic 2.0 Coilovers are engineered and built  specifically for this Long Travel Teryx system. Extensive ride work has  been performed to dial in proper shock valving assuring slow speed  comfort for the trails and around camp with aggressive high speed  damping for open terrain.  All components included in this system are finished in a  neutral gunmetal gray powdercoat.

FEATURES AND BENEFITS

• 1.25″ OD x .120 wall Chromoly tubular  control arms w/dimple die gusset plates for additional strength
• Front upper arms utilize 3/4″ Teflon lined  heim ends
• Heavy Duty 4340 heat treated axle  shafts
• Steering rod extensions with 1/2″ heim  ends accommodate the added track width
• Dirt Logic 2.0 Adjustable Coilover  Reservoir Shocks
• Includes rear Brake Lines
• Track width is 5″ wider per side, 2″ longer  front and rear, and 3″ taller compared to stock.

INSTALLATION & TECH

• 4 hours
• Welding - No
• Cutting - Yes, front fender trimming
• Drilling Required - Yes, upper/lower ball, joint
• Complete installation instructions available on the web  at: www.fabtechmotorsports.com
• TIRE AND WHEEL SIZE
• Stock or Aftermarket

Front-  26×9R12 on 12×7 inch wheels w/4+3 offset

Rear- 26×12R12* on 12×7  inch wheels w/4+3 offset

Qty Part# Description UPC Weight Jobber
1 FTR10084 Component box 1 674866022768 TBD $1,880.00
1 FTR10085 Component box 2 674866022775 TBD $2,619.00
1 FTR10086 Component box 3 674866022782 TBD $493.00
Total Jobber  $4,992.00

Fabtech Motorsports4331 Eucalyptus Ave. Chino, CA 91710

P: 909.597.7800  F:  909.597.7185

Popularity: 36% [?]